Sunday, 20 April 2014

The Small Panzer In A Big Panzer World



Historical Background
In 1934, the Waffenamnt issued a specification for an armoured vehicle weighing 10 tons and armed with a 20mm cannon. In early 1935, MAN, Krupp, Henschel and Daimler-Benz submitted their proposals under the cover name Landwirtschaftlicher Schlepper 100 'agricultural tractor' for evaluation. The new vehicle was to supplement the then-new Panzerkampfwagen I light tank / tankette and capable of firing 20mm high explosive and armour-piercing rounds. Krupp was the first to submit their design but it was not adopted. Eventually it was decided to use the MAN chassis, allied to the hull of the Daimler-Benz design. For testing purposes, pre-production models Ausf. a,b and c of the Panzerkampfwagen II (as the new vehicle was now named) were produced from 1935 to 1937. The Ausf c. introduced the five independent roadwheel suspension, which became standard on full production models.

In July 1937, the first true production Panzer II, Ausf. A was produced. It featured improved transmission and increased armour thickness (from 13mm to 14.5mm). This was followed by the Ausf. B, which featured minor changes. From March 1937 to April 1940, the Ausf. C was produced. All of the Ausf A, B and C have rounded hull front, but many of these were up-armoured before the invasion of France, by having an extra armour plate bolted on the turret front and at the front of the hull. Ausf. D and E featured torsion-bar suspension with four roadwheels and also a new superstructure. The D and E were designed as a fast cavalry tank, geared towards pursuit and reconnaissance. The final major version was Ausf. F, with even thicker armour (35mm front, 30mm on front superstructure and face of the turret and 15mm elsewhere. The commander was provided with a cupola (also retrofitted to many Ausf Cs) and a dummy visor.

All Panzer IIs were powered by Maybach HL62 petrol engine of 138hp. Models A to C had a top speed of 40km/h while the the D and E, using torsion bar suspension had a top road speed of 55km/h. All versions had a range of 200 km. The gun tank versions of the Panzer II were armed with a 20mm cannon, either the KwK 30 L/55 or the KwK 38 L/55. A total of 180 shells were carried. The tank was also armed with a co-axial MG34 machine gun with 2,250 rounds. The 20mm cannon had weak penetrating power and efforts were made to rearm the Panzer II with captured French 37mm gun following the fall of France in 1940, but the project came to nothing. Crew consists of three men - the driver, the loader/radio operator and the commander, who also acted as the gunner.

The Panzer II first saw action in 1938, albeit not 'in anger', during the Anschluss with Austria and the occupation of Czechoslovakia. Despite its supposed role as a training and reconnaissance tank, the Panzer II saw service as a combat tank early in World War 2. Of the 2,750 tanks available for the invasion of Poland on 1 September 1939, 1,223 were Panzer IIs. For operation against France and the Low Countries, 920 Panzer IIs were mustered. Although possessing a smaller gun, the Panzer II was comparable to the Polish 7TP, Soviet T-26 and the French R-35 and H-35/39. Following the reorganization of the Panzertruppen in late 1940/early 1941, the Panzer II was finally relegated to the reconnaissance role. They were however had to be used on occassions during Operation Barbarossa as combat tanks due to the sheer number of Soviet tanks. The Panzer II was finally withdrawn from frontline service in 1943; it however remain in service until the end of the war.

A total of 1,924 Panzer IIs including prototypes were built. The Panzer II chassis was also used for other armoured fighting vehicles, notably the Wespe 105mm self-propelled gun, Marder II tank destroyer, Flammpanzer II Flamingo and Sturmpanzer II Bison assault gun.

The Kit
To commemorate the 40th anniversary of their Military Miniatures range in 2008, Tamiya released a new-tool Panzerkampfwagen II (the first tank in the Military Miniatures range was another Panzer II, the Ausf. F/G). This time Tamiya chose to depict the early war Ausf A/B/C, specifically for the timeframe of Operation Case Yellow (i.e. the invasion of France). The kit parts were spread among five dark grey-coloured sprue trees, hull bottom, a small stainless steel PE fret, poly caps and a decal sheet plus, of course, the instruction sheet. The tracks are of the link-and-length type with sag built-in into the upper runs. Being a modern kit, it has better details than the original Panzer II kit released in 1971. The decal sheet contains markings for four tanks : two from the 6th Panzer Division and the other two from the 4th Panzer Division. As usual, while the decals appear to be well-printed, it looks rather thick.

Construction
The instruction slightly deviates from the usual assembly sequence for an armoured vehicle in that it starts by assembling the running gears first. I however stick to the 'normal' assembly sequence by handling the lower hull first by attaching the suspension to it. The suspension units have good detail, and also a seam line running on top of them. I however had an attack of laziness that day and not cleaning them up! Besides they were not really noticeable (yeah, excuses, excuses). This was followed by the idler wheel mounting and the final drive housing; a poly-cap was inserted into each of the latter to allow movement of the sprocket wheel. Only then I returned to the wheels. Instead of the open backs of the road wheels in their earlier releases (most noticeably on their Shermans), Tamiya includes the inside faces of the wheels. And as usual, all the road wheels and and the idler feature the ubiquitous poly caps. Once completed, they were set aside and I continue with the upper hull.

Before assembling the upper hull, various holes were drilled into it in order to accommodate parts like the armour plates, bullet splash guards and pioneer tools. With the exception of the last mentioned, they were duly cemented onto the upper hull shell. This was followed by attaching the engine deck hatches. As for the hull visor port covers, a decision has to be made at this point - Part B19 for marking options A and B and B20 for options C and D. I decided to do Option D and used the recommended part. To ease assembly, I returned to the lower hull again. I first painted the hull sides and wheels Panzer Grey using  a mixture of Tamiya XF-63 German grey and XF-18 Medium Blue and the tyres straight Gunze H77 Tyre Black while the tracks were painted XF-64 Red Brown. Once the paints were dry, I placed all the wheels onto the chassis, cementing them all but the sprocket wheels. The tracks were then mounted onto the model; the uncemented sprocket were adjusted accordingly while positioning the tracks. when the tracks had dried properly, the upper hull was joined to the lower half. Some parts, such as the headlights, Notek headlight, tool box, hooks, fire extinguisher and the rear mudflaps were cemented onto the upper hull, while the rest were left off until after painting.

Attention was then turned towards turret assembly. The turret upper and lower halves were mated first and all hatches, ports and sundry small parts were cemented onto it, bar the commander's hatch. The instructions then have you complete the gun mantlet and then inserting the whole assembly into the turret shell. I believe this might cause some problem during painting stage, so while I did cement the mantlet, the guns were left off at this time. The mantlet also include poly caps, so that the guns would remain poseable. Now it was time for painting.

Painting and decaling
Early war German panzers were painted dark (or 'panzer' grey). I used a mixture of 80% Tamiya XF-63 German grey and 20% XF-18 Medium Blue, plus roughly 20% white for scale effect. The entire tank was covered in this paint mixture and coupled with its rather diminutive size, painting was over fairly quickly. And, yes, I don't really subscribe to the paint modulation technique or to the simulate-the-light-falling-on-object school of thought. The decals were then applied - I chose the markings for tank number 216 of the 36th Panzer Regiment, 4th Panzer Division, May 1940. The decals, as usual, were fairly thick, but settled well. Afterwards, I applied the sludge wash on certain parts of the model - not really appropriate for a tank model but sufficient for me to pop up some of the recessed details. The guns were painted flat black and when the paint dried, I applied powdered graphite onto them. But before that I covered two sections of the KwK 30 gun barrel with strips of Tamiya tape, to simulate the knurled grips.

Finishing
To start the final leg, I attached all the remaining loose parts such as the pioneer tools and the aerial holder. The guns were glued beforehand and were inserted into their slots through the bottom of the turret. The wooden block was painted XF-59 Desert Yellow and dry-brushed XF-64 Red Brown to simulate wood grain. I had another attack of laziness and simply paint the pioneer tools a straight XF-59 and XF-56 Metallic Grey. The exhaust and muffler were also painted XF-64. The PE exhaust guard was bended using a pencil as guide and fixed to the model using superglue. It was then painted steel with patches of red brown. Finally the colours were blended (sort of) using Tamiya weathering Master Rust.

For weathering, I started by applying thinned XF-57 Buff all over the lower hull, tracks and wheel. I then applied Mig Productions European Dust 'wet' and once dried, removed the excess using a stiff brush. The process was repeated, in patches, using MiG Productions Rubble Dust pigment. The same weathering powders were also applied 'dry' at selected areas of the model. Tamiya did not include the aerial in this kit, and I fashioned one using 0.5mm Evergreen rod. Finally the crew figure was painted and assembled. The uniform was painted NATO Black while the 'metal' parts (belt buckle and decorations) were painted X-11 Silver. I decided not to add any stowed items as early war panzers were rarely seen with them.

Conclusion
Tamiya has come up with another simple yet finely executed model. Assembly is hassle-free as usual, and the moulded-on details, while rather simple for some modelers, are good enough for the casual (or those not suffering from AMS) modelers. Like I mentioned elsewhere, a simple, yet detailed kit is a good antidote for stress after building a 1,000 part 'premium edition' kit!

Saturday, 12 April 2014

An American Hound In Polish Service

Historical Background
In July 1941, The US Army Ordnance Corps issued specifications for a heavy armoured car (which resulted in the T18E1 Boarhound) and a medium armoured car. For the latter, the Ford Motor Company built a 6x6 prototype designated T17 while Chevrolet built a 4x4 prototype designated T17E1. Both prototypes were armed with a 37mm gun in a rotating turret plus a co-axial .30 cal machine gun and another .30 cal MG in the hull. At the same time the British Purchasing Commission were looking for heavy and medium armoured cars for use in the North African theatre. They took interest in the T17 and T17E1, naming them Deerhound and Staghound respectively. However the US Army chose the lighter T22 design for its medium armoured car (later named M8 Greyhound). The T17 Deerhound was only used by US MP units Stateside and was never adopted by the British. T17E1 however was accepted for production, despite not being used by its parent nation.

Over 4,000 Staghounds were built. Variants include the basic Staghound Mk 1, armed with a 37mm gun, two .30 cal M1919A4 machine guns (co-axial and in hull position) plus another M1919A4 on the turret roof for AA defence. Staghound Mk II was armed with a 3-in howitzer for close support while Staghound Mk III had its turret replaced with one from the Crusader tank and was armed with a 6-pounder gun and a co-axial 7.92mm Besa machine gun. Some Mk IIIs were later armed with Ordnance QF 75mm gun. All Mks II and III had their bow machine guns removed. T17E2 Staghounds were T17E1s fitted with Frazer-Nash turret armed with two Browning M2 12.7mm machine guns. It primarily provided low-level air defence capability for the armoured car regiments. There was also the turretless Staghound Command version while the T17E3 was a variant fitted with the turret and armament from the M8 Howitzer Motor Carriage; it was however not adopted for production.

Despite being ordered by the British for service in North Africa, it entered service too late for use in that theatre, where its combination of armour, armament and range had advantage over the German reconnaissance force. It eventually saw operational service during the Italian campaign where its bulk was now a liability in the narrow streets and roads of southern Europe. The Staghound was also used by units in the North West Europe on their drive towards Germany.

The Kit
In 2008, hot on the heels of Bronco's Staghound Mk I Late version, Italeri came up with their 1/35 kit of the Staghound Mk.I Late Version. And as per their agreement (I guess), the kit was re-boxed and released by Tamiya in the same year. The kit came in 222 parts, laid over five olive coloured sprues, 2 clear parts and small PE fret. Also included was a length of wire, decal sheet and of course, the instruction sheet. The instructions however were of the usual Tamiya style, instead of simply using the original Italeri instructions (which used the rather disliked photo-style instructions, like what Dragon did a number of years ago). The turned aluminium barrel from the original kit was omitted but a sprue containing the figures from Tamiya's Universal Carrier Mk II European Campaign was included. The Photographic Reference Manual from the original release was also included for the Tamiya release. The surface detail is very good, although not as sharp as the Bronco Staghound.

Decals were provided for five options covering both wartime and post-WW2 period. They are for:
1. 7th Armoured Division, British Army, France 1944
2. 'Ardent', Belgian Brigade Group, France September 1944
3. Esercito Italiano, unknown cavalry regiment, late 1950s
4. 1st Australian Armoured Car Regiment, BCOF, Japan 1946-1948
5. 'Nadwislanin', Polish 2nd Corps, Italy 1944

The decals were of typical Italeri quality - nicely printed with no register issues.

Construction
The Staghound kit started off slightly different from the usual AFV kits construction sequence - it started at the front plate of the hull. The instructions have you drill a number of holes into the front panel and to cut clear plastic pieces to act as windscreens. While I did drill the holes, I left the clear plastic parts, plus the PE frame and wipers, off as I intended to have the covers for the crew windscreens in the closed position. Steps 2-4 were concerned with the basic assembly of the hull. Fit is good and the one-piece lower hull makes it easier to assemble than the Bronco kit, which have separate side walls and floor. Moving on to Step 5, this was the assembly of the leaf-style suspension. Afterwards, it was time to assemble the external fuel tanks and their mounts. The fuel drums was divided into four parts and the seams between the body halves need to be sanded off. While the instructions have you fully assemble the tanks and the mounts before attaching them to the hull, I diverged by attaching the mounts (part B42) to the hull first. This was followed by the drums. The mounting end of the PE straps were then inserted into place and was followed with Part B36 (the hooks for the straps) to the hull. The female end of the bended straps were then hooked  into place, parts B18 and B28 were cemented to the hull and the fuel tank assembly was attached to the hull.

The engine covers were then cemented into place and the detail parts were attached. These include PE brackets and wingnuts. This was followed by the engine grille covers and fenders. The tyre halves were mated but I left them off until after painting. all the hull hatches, including the driver's and co-driver's armoured windscreen covers were attached in the closed position. All the smaller parts, except on-vehicle tools, rear-view mirrors and the exhausts were glued at this time. These also include the PE box at the rear of the vehicle and the PE light guards (bended using the bending tool provided). Moving on from the hull, I started the turret assembly, beginning with the main gun. While the original release used turned aluminium barrel, the Tamiya release has a plastic replacement. There was no problem here, although the Italeri .30 cal barrel (for the co-axial and hull) MG has less definition than other manufacturers' offering. Steps 20 to 21 were concerned with the turret basket assembly. The turret basket was assembled as they were but the lightening holes can be drilled to have better definition. The turret shell halves were then mated together. However, the resulting seam line was not sanded off and was merely cleaned up as there is weld seam at the location on the real vehicle. Italeri also provided a reasonably detailed No.19 radio set, to be placed at the rear of the turret. I simply put it in place, without painting, as it would be invisible, with the crew figures in place. The completed turret basket and the front face of the turret were then cemented to the turret shell. As usual, the smaller parts were left off until after painting.

Painting and Decaling
Because of the presence of PE parts, I first sprayed the model with Tamiya Surface Primer (Grey). At the beginning of the build, I had decided to finish the kit in the Polish 2nd Corps marking. The kit instructions have you paint the kit in an overall dark yellow paint job with disruptive pattern in dark green. I however remembered an article written by Mark Starmer, who was regarded by the modeling community as an expert in British camouflage colours during World War 2. He stated that, starting from March 1943 in the North African theatre and continuing to the Sicilian and Italian campaigns, a lot of British and Commonwealth vehicles were painted in a colour called 'Light Mud'. Although Light Mud was usually used in conjunction with 'Blue Black' (Tamiya XF69 NATO Black can be used for this colour), I decided to paint the disruptive pattern in Olive Drab. The Light Mud was painted using a 4:2:1 ratio of Tamiya XF55 Deck Tan, XF49 Khaki and XF66 Light Grey, as per Mr. Starmer's recommendation. While originally planning to paint the olive drab pattern using Mr Starmer's mix for the British SCC15 Olive Drab, I eventually decided to simply use Tamiya XF-62. The still unattached parts were also painted at this time. The tools were painted XF-59 Desert Yellow and Steel for their wooden and metal parts respectively. The machine guns were painted flat black and were 'metalized' by rubbing graphite whilst the tyres were painted Gunze H77 Tyre Black.

The decals were then applied onto the model.  They went on well, even though I didn't prep the surface beforehand. There is however a slight silvering for one of the decals and I'm positive that it was caused by the untreated surface. The decals were then subjected to the usual decal setting solution treatment.

Finishing
Now is the time to attach the remaining parts. I started by fixing the pioneer tools at their places. This was followed by placing the tow cable at the glacis plate. The provided steel wire was quite stiff and I have to anneal it first before attaching the ends and wounding it around the anchor points. While still using the kit mount and cradle for the AA MG, the M1919 MG and the ammo box was replaced with the one from the Academy US Machine Guns Set. By this time I have also bought Bronco's 25-pounder Ammo box set, which can be mounted onto the Staghound's fenders. I used two of them, mounted on the front fenders - after fashioning a simple rack for them using styrene strips. With the boxes in place, the rear-view mirrors were left off. The provided tarps were placed on the rear fenders, after painting them XF-49 Khaki. I also decided to place some stowage on the engine deck and the rear box and I used a wooden ammo box from Academy's Tank Supplies Set, a couple of .30 cal ammo boxes from Academy's US Machine Guns Set and a bedroll plus four fuel cans from Tamiya's Allied Vehicles Accessory Set. I used a thread from my wife's sewing kit, painted XF-59 Desert Yellow to tie the stowage onto the model (I cemented them on anyway, the string was mainly to create some degree of realism). The commander's hatch was put in the open position so that I can use the commander's figure to illustrate the size of the vehicle. His uniform was painted with a mixture of Tamiya XF-57 Buff and XF-52 Dark Earth with the suspenders in XF-49 Khaki. 

Finally, the weathering process. I started by washing the model by using a mixture of Flat Black and Red Brown. I then added some small paint scratches using 2B pencil but I decided not to add larger scratches. Tamiya Weathering Master was applied to the exhausts to simulate rust. Finally I add 'dust' to the running gears and the underside of the model using Mig Productions Gulf War Sand. This was however my first attempt of adding dust to a wheeled vehicle, so the results were quite terrible, as can be seen from the photos. A length of copper wire, painted black, was used as the radio aerial. I am however, not quite sure whether the length of the aerial is correct or not.

Conclusion
Italeri has come up with an excellent kit of the Staghound armoured car. Yes, there is a little bit of a problem with the fit, but nothing that any modeler could overcome (unless a total newcomer to the hobby). The machine guns however could be better and best replaced. The Tamiya version was virtually similar to the original release and I lament the deletion of the turned aluminium barrel. Whether the inclusion of three figures plus a PIAT projector and a Sten Gun were worth the extra cost for the Tamiya boxing is a question I left to the readers to decide.



Sunday, 30 March 2014

Stalin's Steamroller


Historical Background
In 1937, the Red Army assigned engineer Mikhail Koshkin to design a replacement for the BT-series tanks at the Kharkov Komintern Locomotive Plant (KhPZ, later Zavod No.183). The specification include 20mm of armour, a 45mm gun and powered by a diesel-fuelled V-12 engine while using the same Christie-type suspension while incorporating sloped armour plates. Following the Red Army experience in the border clashes with the Japanese Army at the Battles of Lake Khasan and Khalkin Gol, in which the Soviet T-26, BT-5 and BT-7 tanks were easily destroyed by Japanese anti-tank teams armed with Molotov Cocktails and also by the Type 95 Ha-Go's 37 mm gun, Mikhail Koshkin sought the permission from Stalin to develop a  second prototype, named A-32. It was armed with a 76.2 mm L-10 gun, protected by 32 mm of armour whilst using the same engine.

A heavier version of the A-32, with 45 mm of armour and armed with an L-11 76.2 mm gun was approved for production as the T-34. The T-34 however faced initial resistance from the military with regards to its higher cost. However concerns about the performance of the Red Army tanks in the Finnish-Soviet Winter War coupled with the performance of the German tanks in Western Europe ended such resistance. The first T-34s entered service in September 1940. T-34s were built at State-owned factories: Kharkov Locomotive Factory No. 183 (KhPZ) at Kharkov (later evacuated to Nizhniy Tagil and combined with Dzerzhinsky Ural Railroad Car Works), Stalingrad Tractor Factory (STZ) at Stalingrad and Krasnoye Sormovo No.112 Factory at Gorky plus factories at Leningrad which were later transferred to Chelyabinsk (Tankograd) and at Ural Heavy Machinery Plant (UZTM) at Sverdlovsk. The L-11 gun were however inferior and was later replaced with the more powerful F-34.

The sloped armour of T-34 was effective in deflecting AP rounds, especially the 37mm rounds used by the Germans early in the war. The F-34 gun, firing APCR shells can pierce 92 mm of armour at 500 meters (to put it in perspective, the German Panzers III and IV have frontal armour of 50 to 60 mm). The wide tracks and Christie suspension gave good mobility, especially in the muddy and snowy battlefields of the Eastern Front. The T-34 however had some design deficiencies. The sloped armour, while causing headaches to the Germans, have overall build quality problem especially at the plate joints and welding.The F-34 gun lost its effectiveness when the Germans introduced their Panther and Tiger tanks. The main deficiency however was concerned with the two-man turret, a trait it shared with many tanks of the same time frame. This arrangement forced the tank commander to act as gunner, aiming and firing the gun, while at the same time having to command his own tank and coordinating with other tanks. The workload get heavier if he was a platoon commander or higher. The forward-opening turret hatch and lack of turret cupola also hinder the commander's job who only had a single viewing slit and a traversable periscope to view the battlefield. The gun's reduced performance against heavy German tanks was rectified by upgunning the T-34 with a 85mm gun in the T-34/85 variant. The visibility problem was rectified in August 1942 by replacing the single-piece hatch with separate hatches for the commander and loader and later still, a cupola. The commander workload problem was only rectified with the T-34/85 when the T-34 was fitted with a three-man turret.

The T-34 were a complete shock to the invading Germans when the latter launched Operation Barbarossa on 22 June 1941. The Soviets had 967 T-34s at the start of the hostilities and in one instance a single tank managed to cut a 14-kilometer trail of destruction before it was stopped by a 105mm howitzer at close range. The PaK 36 37 mm anti-tank gun was completely useless against it, forcing the usage of 105 mm howitzers or 88 mm Flak 36/37 in the direct fire role to counter it. Despite that, the Soviets lost large numbers of them, at least half were caused by mechanical failures or reasons other than enemy actions. With the Germans receiving more 75mm Pak 40 anti-tank guns and more 88s were used in the anti-tank role, the T-34s were also upgraded incrementally, receiving thicker armour and better transmission. T-34s are the second most manufactured tank in the world (the first place goes to the T-54/55 family): 34,780 76mm gun-armed and 22,559 85mm gun-armed models were built during the war.

The Kit
Dragon Kit #6479 follows a line of new-mold T-34/76 series from Dragon starting with the T-34/76 Model 1940 in 2003. The new 34s from Dragon are among the best of their product. In true Dragon tradition the box was packed with parts - 19 sprues, a set of Magic Track links, a rather sizeable (for Dragon's 'Smart Kit' concept) PE sheet and a turned aluminium barrel. Included are Factory 112 specific parts such as the turret. The are three versions of the gun, turned aluminium, plastic single piece and a two-part one. The breech and partial interior of the turret were also included.

Markings were provided for five tanks (technically four as one of the options is totally devoid of any markings!) :
- Unidentified Unit, Eastern Front 1943
- Unidentified Unit, Eastern Front 1943 (white 41/05)
- Unidentified Unit, Eastern Front 1943 (white 64)
- Polish 1st Tank Regiment, Oka River, Russia July 1943 (white Polish Eagle)
- 8th Estonian Infantry Corps, Eastern Front 1943 ('For Soviet Estonia!' in Russian and Estonian) 

Construction
As usual, construction starts with the lower hull. I follow the construction steps to the letter (almost). As per online reference material, I shaved off the row of bolts moulded on the forward lower hull as they were not present in this variant. The suspension were first glued in place. Then the running gears (idler and drive wheels) were added, but not yet glued to the chassis. This was followed by the road wheels but I left off the outside wheels at this time, to facilitate assembling the tracks. Since the T-34 used the Christie suspension with large road wheels and with no return rollers, assembly was quick, unlike assembling the 32 road wheels of a Panzer IV...maybe I should thank Mikhail Koshkin for choosing the Christie suspension! Also to facilitate painting, the completed lower hull was painted at this time. The next construction step deals with the upper hull. The plastic rear fender was cut off and were replaced with the PE substitute. For the engine deck, one can actually choose a solid plastic mesh or a better detailed one with PE components. In this case, the locating pin underneath the engine hatch had to be removed, as it interfered with the engine louvre locating tabs.

The rows of bolts on the engine deck also needed to be removed to ensure good fit. I however neglected to paint the engine louvres, thinking that the grille mesh can hide them...how wrong I were! And speaking of the grill mesh, it was located on the curve of the rear deck. To help the metal part conform to the slope, I annealeate the relevant PE parts before gluing them. Easy! As for the intake grills, two styles were provided but internet sources suggest using Parts G20/21 as it was more appropriate. Afterwards came the almost surgical-like precision when building this model - attaching the scores of PE track grouser tie downs and grab handles. To make it harder for modelers, there is no positive locators for them and I had to resort to visual estimation based on the drawings. Going to the front, the hull machine gun was assembled, less the machine gun barrel. The driver's hatch was assembled in fully closed position and I left the vision blocks off as it can only be fitted in the open position. The headlight has an alternative PE post, which I used. This however mean that I have to putty over the hole for the plastic one.

On to the turret. Before assembling it, I decided to paint the interior parts first. There is no colour call-out for the turret interior so I had to guess, based on photos on the internet. I decided to use Tamiya XF-71 Japanese Interior Green. The gun shield and housing feature nice details while there were three options for the gun barrel - turned aluminium, single-piece plastic and two-part plastic. I chose the former because of its better shape plus there is no need to clean out the seams. There is also option (sort of) for the turret roof as Dragon included the turret roof from the earlier T-34/76 Model 1941 Cast Turret. The instructions however show that the proper part would be the new Part U14. The single Part R sprue held the turret hatch and one can retain the moulded-on details or remove them and add the PE parts. I decided to have the hatch open, so I added the PE parts. While test-fitting the hatch, I found that the bracket holding the hatch in the open position interfered with the fit so some trimming had to be done.

Going back to the lower hull, it's time to assemble the tracks. Dragon provided their tried and trusted Magic Track links. The track links were not 'handed' like the Magic Track track links for the German AFVs, just plain and toothed links, to be linked alternately. I did not count how many were needed to make one track run but suffice to say that there were enough of them (plus some spare). They were cemented using Tamiya Extra Thin Cement and once near-dry, they were wrapped around the wheels. Once properly cured they were removed and set aside. Before painting, I decided to add the tankoviy desant handrails - 4 on the turret and 10 on the upper hull. The instructions however swapped the positions for the turret handrails, causing awkward-looking rails, which was fortunately realized early. I pulled them off and reposition them at their actual locations.

Painting and decaling
Basic painting of Soviet tanks of World War 2 is relatively easy - green overall. There were various formulas and mixtures for the Russian green (also known as 4BO Green) but I clung to a mixture I found years ago on the Internet - six parts XF-61 Dark Green (I used XF-13 for this build however), 3 parts XF-2 Flat White and one part XF-3 Flat Yellow plus 20% white for scale effect. But before painting, the model was subjected to a coat of Tamiya Surface Primer. Once the primer had dried, I checked for any (major only) imperfections. Finding none (or minor enough to be unnoticed) I proceeded with the green. Once the paint has cured, I added chips and scratches to the paint using XF-62 Olive Drab and HB pencil. The exhaust pipe was painted XF-64 Red Brown and was later enhanced using Tamiya Weathering Master Rust.

I decided to use the decals for the 8th Estonian Infantry Corps with its 'For Soviet Estonia!' slogan. There were actually extra decals on the sheet - a pair of Guards badge and a slogan (something about Kazakhstan) but there were no colour scheme which uses them, I guess they were a carryover from an earlier release. The decals were printed by Cartograf and were agreeably thin and opaque. They went on without a problem and there is no need to use decal solutions on them. I then painted the tracks using XF-64 and dry-brushed the guide teeth silver.  The track face received some 'polished metal' effect, using HB pencil.

Finishing
The  tracks can now be permanently fixed to the hull. The outer road wheel and the drive and idler wheel neatly trapped the track in place ( I glued the tracks to the upper surface of the road wheels anyway).To place the track grousers on the sponson, the PE straps were threaded through the tie-down brackets first. The track grousers were then put into place and the loose ends of the straps were mated - it should work like putting on a belt although I only managed to do that for a couple of straps only. The rest were simply superimposed or left untied. The tow cable, consisting of plastic eyes and braided steel wire was assembled, painted and placed on the right sponson. I also added a wooden box, taken from my earlier (waay earlier) Tamiya T-34/76 Model 1943. For further weathering, I decided to apply MiG Productions Rubble Dust. Mixed with tap water, the pigment was applied liberally to the lower hull, tracks and wheels. Once dry, excess pigment were removed using an old, stiff brush. I then add a bit more of the pigments, this time 'dry' randomly on the wheels and on the lower hull. It was then fixed in place (more or less) using Tamiya Enamel Thinner. Finally, using Tamiya X-19 Smoke, I added some oily residue on the exhausts and the area directly underneath them.

To illustrate the size of the vehicle, I added a crew figure from Miniart's Soviet Tank Crew At Rest set.

Conclusion
There is no doubt that Dragon is one of the leading (if not actually the leader of) manufacturers of fine armour kits. They constantly come out with amazing kits of various combat vehicles of World War 2 and the T-34/76 'Krasnoye Sormovo' Late kit was merely one of them. The kit builds up fairly easy and the 'Smart Kit' concept helped in reducing the number of PE parts as compared to the 'Premium Edition' kits. Whilst it may not be every one's cup of tea, the Magic track links also helped considerably in easing the build. This kit is highly recommended. 

Wednesday, 12 March 2014

Dinah The B-29 Hunter




Historical Background
In December 1937, the Imperial Japanese Army air Force issued a specification to Mitsubishi Heavy Industries for a long-range strategic reconnaissance aircraft to replace the same company's Ki-15 'Babs'. The request specifically stated an endurance of six hours and sufficient speed (600km/h) to evade interception by any fighters then in existence or under development, but the rest of the specification were open-ended. The result was a twin-engined low-wing aircraft. It had a slim fuselage accomodating a crew of two (pilot and observer) in cockpits separated by a large fuel tank. Further fuel tanks inboard and outboard of the engines gave a total fuel tankage of 1,490 l. The engines were housed in a close-fitting cowlings developed by the Aeronautical Research Institute of the Tokyo Imperial University. The first prototype of the aircraft, designated Ki-46, first flew in November 1939. While successful in many respects, tests showed that it was underpowered and it could only reach 540km/h. Still, it was faster than the latest Japanese fighters at the time, the Nakajima Ki-43 Hayabusa and Mitsubishi's own A6M2 Reisen. The Ki-46 was accepted into limited production as Army Type 100 Command Reconaissance Plane Model 1 or Ki-46-I. The Ki-46 gained the Allied reporting name of 'Dinah'.

To solve the problems, Mitsubishi replaced the original Mitsubishi Ha-26 engines with Ha-102 Zuisei, delivering 1,080 hp at take-off. At the same time the weight was reduced whilst fuel capacity was increased. This new variant, the Ki-46-II was first flown in March 1941 and was ordered into full-scale production with deliveries beginning July 1941. While the Ki-46-I and -II were immune from interception by Allied fighters early in the Pacific War, the IJAAF realised that higher performance fighters such as the Supermarine Spitfire and Lockheed P-38 could change the situation. In July 1942, Mitsubishi was instructed to build an even better performing version, the Ki-46-III. The -III was powered by Mitsubishi Ha-112 Kinsei engines of 1,800hp and featured a redesigned nose and canopy, which was smoothly faired from the extreme nose, eliminating the 'step' in earlier versions. The new variant first flew in December 1942.

Also in 1942, following the Doolittle Raid, the Japanese realised the problem of dealing with future American high-altitude bombers hitting the Home Islands. Advanced interceptors for army and navy aviation would not appear before 1944, so interim interceptors would have to be developed from existing aircraft. There weren't many aircraft in the IJAAF inventory that can fit the bill. The IJAAF's version of the heavy fighter was the twin-engined Kawasaki Ki-45 Toryu. The Toryu was capable of carrying powerful weapons, but had insufficient ceiling, and its performance characteristics are not terribly better than its intended victim On the other hand was the Ki-46. At the turn of 1942-43 it was the fastest plane in the Japanese inventory with good altitude performance. The Army decided to turn the recon planes into fighters. The Ki-46-II was selected and the Tachikawa Techical Research Institute installed a Type 98 37mm gun in the nose with the breech under the pilot's legs. The gun was manually loaded and in a relatively cramped cockpit was a big problem, dividing the pilot's attention. The gun has a rate of fire of one shot every three minutes. The 644-gram shell was theoretically able to down a B-17-sized target with a single shot. 

The first conversion was completed in January 1943 and the tests were satisfactory. Seventeen aircraft (including the prototype) were converted, enough to form a Chutai (squadron). On February 1, 1943 the new interceptors were loaded on board the escort carrier Taiyo and were sent to Truk where they worked out tactics of the new interceptor. As reported by pilots, the heavy gun and reinforced nose portion shifted the CG of the aircraft making it extremely unstable. As a result, only six of the 17 modified aircraft were transferred, in late February, to the 10th Sentai staffed by the recon crews of the standard Ki-46. Despite the apparent failure of the Ki-46 as a fighter, the Army Command still felt the need for such fighters. In February 1943, when the air battles over Rabaul entered a critical stage, the reconnaissance Dinah were used as a stop-gap air defence aircraft. Since they were unarmed, save for a single self-defence machine gun, the Dinah used 'Ta-Dan' aerial bombs. The Ta-Dan contained thirty 300g cluster bombs and were released over the enemy bomber formation. The pilots claimed six B-24 Liberators and two B-25 Mitchells. 

The next attempt to create an interceptor based on the 'Dinah' were begun in May 1944 , when a dedicated interceptor based on the Ki-46-III was developed. The nose was reworked again and two 20-mm cannons were installed with 200 rounds of ammunition per gun. Due to the lack of space in the nose of the aircraft, the left gun was placed slightly forward. All recon equipment were removed and individual exhaust pipes were replaced by a common collector, to give less glow at night. Also, there was an additional fuel pump, to allow a sharp climb without 'choking' the engine. The fighter version received official designation Ki-46-III KAI Otsu or Army Type 100 Model III Modified Air Defence Fighter. The 1st Army Arsenal in Tachikawa modified 55 regular 'Dinah', with another 20 directly converted on the assembly line. In July 1944, the IJAAF introduced the Ki-46-III KAI Otsu-Hei. The fuselage fuel tank was replaced with a 37mm, angled 70 degrees forward and upward a la the Luftwaffe's Schräge Musik installation. Up to sixty 37mm rounds can be carried. Only 15 Otsu-Heis were built.  

In parallel with the field-modified Ki-46 interceptors, the 17th Dokuritsu Hikotai (independent squadron) equipped with Ki-46-II and -III, stationed in Chofu, modified a number of their aircraft in the field. In November 1944, six Ki-46-IIs and one Ki-46-III were fitted with a 37 mm gun in a similar manner as the official Ki-46 KAI Otsu-Hei. All the fighter (and also the reconnaissance) Dinahs can carry the Ta Dan aerial bombs. The Otsu-Hei were only used by by the 16th and 17th Dokoritsu Hikotais. Despite originally having superb performance as a reconnaissance aircraft, the Dinah were weighed down by the 20mm and 37mm  (in the Otsu-Hei variant) cannons and their ammo. This in turn affected its climb rate, making it hard to catch the B-29s. The Dinah also lacked armour and self-sealing fuel tanks, making it an easy meat for the bombers' defensive fire (and later, escort fighters). The structural lightness of the designed also caused problems when the 37mm gun is fired. When the B-29s shifted to low-level, night operations, the Dinah became virtually useless as it had no radar. The pilots were also picked from among the recon crews, who were not trained in fighter tactics and lacked combat experience. They tend to rely more on Ta-Dan bombs rather than the cannons when attacking the Superfortress formations. On the other hand, the reconnaissance Dinah were used to report the incoming raids as they had the altitude and speed necessary to track the B-29s.

The Kit
Tamiya styled its kit of the Ki-46-III KAI as 'Hyakushiki Shitei III Kai Air Defence Fighter'. The kit was first released in 1997 and was the second 1/48 kit of the Ki-46 in their catalogue. The kit parts were spread among five light grey and one clear sprues and one decal sheet, printed by ScaleMaster. Most of the parts share the same parts with the recon Dinah kit, with the extreme nose separately moulded. The new 37mm cannon parts looked rather simplified though. While parts for the recon version were omitted, perhaps some more common items such as radio and oxygen bottles can be retained, plus additional items such as ammo racks. Also included were two Ta-Dan aerial bombs. Decals were provided for three aircraft - two of them were Otsu-Hei variant and the other is an Otsu. The Otsu-Heis were from the 16th and 17th Dokoritsu Hikotai while the Otsu was from the 28th Hiko Sentai.

Construction
Construction starts with the wings...just kidding. The cockpit parts were painted Japanese interior green using the mixture recommended by Tamiya with the details painted XF-57 Buff and X-18 Semi-Gloss Black. As for the rear cockpit, I decided to build the Otsu-Hei. As mentioned before, the gun parts were simplified, consisting of just two parts. and, as stated before, the rear cockpit looked empty. It would look even more empty (some modelers said it actually looked unfinished) if one builds the Otsu version with just the mount for the 37mm gun sticking out of the floor. The fuselage halves were also painted the interior green and once dry, the cockpits were trapped between them and Tamiya Extra Thin Cement were used to seal the fuselage. But wait, did I say I wanted to build the Otsu-Hei version with the slanted 37mm gun? Yep, I forgot to drill the hole for the gun barrel mount!

The next step is concerned with the wings. First, I assembled the landing gears. The kit's engineering splits the wheel well, resulting in a seam down the middle. The seam was hard to remove as the landing gear, which is to be sandwiched between the well halves, were in the way. The completed wheel wells were then inserted into their places in the lower wing. The wheels were however left off at this time. I also decided to fit the Ta-Dan bombs, so the holes for the pylons were drilled. The upper wing halves were then cemented together. After the cement has cured and while preparing for the next step, I realised that I forget to open up the recess for the spotlight! Something else have to be done to make up for this error (more on this later). The wing assembly and the tailplanes were then attached to the fuselage. Like the main wheels, the tail wheel was left off until after painting. The engines were then assembled and attched to the model while all clear parts were also left off save for parts C4 and C7, which was shown to be painted over in the instructions.

Painting and Decaling
I actually built this model several years ago. At the time, I decided to finish the model in the colours of the 17th Dokoritsu Hikotai, just to be different from the other Japanese aircraft in my collection. However after several years, the ID panel and the air defence 'bandage' decals started to crack. I decided to repaint the model, using the leftover decals. The paint were stripped off using window cleaner and isopropyl alcohol. The interior colour was repainted XF71 Japanese Interior Green whilst the lower colour was painted using the same mixture as suggested. It was the upper colour however that I faced some problems, chiefly, I had run out of XF13 JA Green (should have checked beforehand). To get the JA Green shade, I experimented using Tamiya XF11 JN Green into which was added a few drops of XF3 Flat Yellow. The shade somewhat looked like JA Green and having satisfied with the colour, I added XF-69 NATO Black (instead of XF-1 Flat Black as suggested) and some XF-2 Flat White for scale......or so I thought. The resulting colour, while darker than scale-effect JA Green, wasn't dark enough. By this time, I'm no longer interested in repainting the model and left it as it is. Besides, some online reviews mention that the 16th Dokoritsu Hikotai's aircraft were painted the 'normal' JA Green. The ID panel on the wing leading edge were painted using a mixture of XF-3 Flat Yellow and XF-7 Red.

The model was then re-decalled and I have to say that, at least for this kit, the Scalemaster decals behaved almost like cardboard rather than decal. They don't conform to bumps and bulges (the wing Hinomarus, in both builds, were torn when I tried to force them over the aileron mechanism) and they didn't react well even to Mr Mark Softer. The wing Hinomarus were then touched up with XF2 Flat White and X-7 Red. I however couldn't find the numeral '24' and couldn't any suitable substitute (the decals from my Hasegawa A6M5c can be used but I only discovered them in another box, used for spare parts after the model has been completed). Browsing the internet, I found that the only photos and profiles for the Otsu-Hei variant were those for the brown 16th Dokuritsu Hikotai and aircraft numbered '17' and '24' of the 17th. So applying artistic license, I cut off number 16 (it was about the same font type and size) from my Hasegawa N1K2 Shiden decal sheet and applied it to the model.


Finishing

The rest of the parts can now be cemented. These include the propellers, nose cannons, main wheel tyres, pitot tube, the tail wheel and the Ta-Dan bombs. The oblique cannon were glued into place using superglue, after the placement tab was shaved off. The cockpit transparencies fit nicely for the pilot's but the rear cockpit has some fit problem, especially for the sliding part. The model was then subjected to the usual sludge wash and the final spray of flat clear.



Conclusion
Well, it's a Tamiya. Just place a tube or a bottle of cement and a sprue inside the kit box, give it a good shake and out comes a fully assembled model. Apart from some goofs, such as incomplete rear fuselage, the fit of the canopy and the crap decal sheet, the kit came together easily. Highly recommended for aircraft modelers especially those who have great interest in Japanese aircraft of World War 2.